10 / 100Mbps multiport fiber to ethernet switch 2 Fiber ports + 3 RJ45 Ports

10 / 100Mbps multiport fiber to ethernet switch 2 Fiber ports + 3 RJ45 Ports

 
Product Description
 
The multiport fiber media converter, also named unmanaged fiber switch, it has the similar functions as normal fiber media converter, when you use the converter,all the data from different ports can be shared, realize the data sharing.It is suitable for intelligent community and extend the network transmission from 100m to 120km.
 
Also it can be realize the interconnection between motherboard server, Repeaters, hubs, switches, terminal.Plug and play design makes easy installation, no on-site adjustment, All the light, electricity interfaces are in line with international standards, products applicable to different harsh industrial environment.
 
The installation and operation procedures of the Fiber Optic Media Converter are simple and straight forward. Operation status can be monitored through a set of Diagnostic LED located in the front panel. Since the data rate is auto-negotiated, no internal adjustments or setting are necessary. Standard shielded RJ-45 connectors are provided.
 
 
Application

 
Features

•  _{2×100Base-FX to 3×10/100Base-TX Port}
•  _{RJ45 support auto MDI/MDI-X function}
•  _{Auto-negotiation speed, half/full-duplex}
•  _{Each port has the complete LED Indicator light}
•  _{Support IEEE802.1d Spanning Tree}
•  _{Supports high performance QoS function on each port}
•  _{Flow control fully supported}
•  _{Support broadcast storm protection}
•  _{Support custom the wide voltage (4.5V to 20V) input}
•  _{Support custom the ISOLATE-USER-VLAN}
•  _{Support max forwarding packet length 2048 bytes option}
•  _{Requires no configuration and will instantly operate as soon as you power it up}
•  _{Low power consumption, power is only 2.5W when each port is working}

 
Specifications

Order Information