|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | CWDM Splitter | Channel Number: | 2 Channels |
|---|---|---|---|
| Wavelength: | 1270~1610nm Available | Connector: | LC/SC/FC/ST (PC Or APC) |
| Fiber Type: | Simplex | Fiber Length: | Acess Network |
| High Light: | coarse wavelength division multiplexer,cwdm multiplexer |
||
2 Channels Acess Network CWDM Mux Demux ABS Pigtailed Module
GEZHI Photonics CWDM (Coarse Wave Division Multiplexing) MUX/DEMUX (Multiplexer/Demultiplexer) is a flexible, low-cost solution that enables the expansion of existing fiber capacity. GEZHI Photonics CWDM MUX/DEMUX modules support ITU-T G694.2 CWDM wavelengths between 1270 nm to 1610 nm in 20 nm increments.
They accept any data rate and any protocol on any port up to 10 Gpbs, also 40 Gbps and 100 Gbps. The CWDM MUX & DEMUX over simple fiber is capable of coming up to 18 optical signals into a single fiber and supports a broad range of architectures, ranging from scalable point-to-point links to two fiber protected rings. We offer a complete portfolio of CWDM Mux Demux Module over dual fiber or simplex fiber, with package types of Plastic ABS module cassette, 19" rack mountable box or market-standard LGX packaging, custom wavelength channels are available.
Item Details:
Specification:
| Parameter | 4 Channel | 8 Channel | 16 Channel | ||||
| Mux | Demux | Mux | Demux | Mux | Demux | ||
| Channel Wavelength (nm) | 1270~1610 | ||||||
| Center wavelength Accuracy (nm) | ±0.5 | ||||||
| Channel Spacing (nm) | 20 | ||||||
| Channel Passband (@-0.5dB bandwidth (nm) | >13 | ||||||
| Insertion Loss (dB) | ≤1.6 | ≤2.5 | ≤4.5 | ||||
| Channel Uniformity (dB) | ≤0.6 | ≤1.0 | ≤1.5 | ||||
| Channel Ripple (dB) | 0.3 | ||||||
| Isolation (dB) | Adjacent | N/A | >30 | N/A | >30 | N/A | >30 |
| Non-adjacent | N/A | >40 | N/A | >40 | N/A | >40 | |
| Inertion Loss Temperature Sensitivity (dB/℃) | <0.005 | ||||||
| Wavelength Temperature Shifting (nm/℃) | <0.002 | ||||||
| Polarization Dependent Loss (dB) | <0.1 | ||||||
| Polarization Mode Dispersion | <0.1 | ||||||
| Directivity (dB) | >50 | ||||||
| Return Loss (dB) | >45 | ||||||
| Maximum Power Handling (mW) | 300 | ||||||
| Opterating Temperature (℃) | -5~+75 | ||||||
| Storage Temperature (℃) | -40~85 | ||||||
| Package dimension (mm) | L100 x W80 x H10 | L140 x W115 x H18 | |||||
Specification may change without notice.
Above specification are for device without connector.
Ordering Information
| CWDM | XX | X | XX | X | X | XX |
| Number of Channels |
Confi -guration |
1st Channel | Fiber Type | Fiber Length | In/Out Connector | |
|
04=4 Channel 08=8 Channel 16=16 Channel 18=18 Channel N=N Channel |
M=Mux D=Demux O=OADM |
27=1270nm …… 47=1470nm 49=1490nm …… 61=1610nm SS=special |
1=Bare fiber 2=900um loose tube 3=2mmCable 4=3mmCable |
1=1m 2=2m S=Specify |
0=None 1=FC/APC 2=FC/PC 3=SC/APC 4=SC/PC 5=ST 6=LC S=Specify |
A Common port:
B Standard port 1310nm:
C Standard port 1550nm:
D Mux/Demux port for specific wavelengths:
E Express port:
F Monitor port:
Contact Person: Ena Lin
Tel: +8613544277727
